Sanitary Check Valve
Part #: SHC-100-6L/TCS6TF
$2,216.00
1″ Triclamp Check Valve, 316L Body and Disc, Teflon O-Ring
The patented SVC/SHC Series are vertical and horizontal check valves designed specifically for use in biopharmaceutical and parenteral drug manufacturing applications. They are the first check valves to follow the valve design guidelines of ASME BPE 2016. Since no spring, hinge, mechanical return mechanism or stem is used, they are crevice free, have no areas for particle entrapment, minimize particulate shedding, and are CIP and SIP capable, and autoclavable.
Part #: SHC-100-6L/TCS6TF
Datasheet: https://nesentrol.com/datasheets/Steriflow SHC_SVC DataSheet.pdf
• NEW! DIN & ISO Tri-Clamp and tube weld ends – standard
• NEW – The first and only vertical down flow sanitary check valve that is continuously self draining
• Applicable for gas or liquids, and suitable for CIP and SIP, and are autoclavable
• Elimination of springs or hinges speeds opening time and eliminates particle entrapment areas
• High flow rates with minimal pressure loss compared with mechanical return check valves
• Low particle shedding properties compared with sliding disc type or spring return check valves
• Unique design eliminates dead space and crevices associated with spring check valves
• All wetted internal surfaces are mechanically polished and electropolished to SF5, 20 Ra µin (.5 Ra µm), all external surfaces are 40 Ra µin (1 Ra µm), electropolished, other finishes optional
• Sanitary tube weld ends and Tri-clamp ends available
• Positive shutoff without the use of a spring
- Size: 1/2″ – 2″ (DN15 – DN50)
- End Connections: ASME, DIN, ISO Tri-Clamp and Tube Weld Ends
- Cv (Kv): 3.4 – 23.1 (2,94 – 20)
- Max Pressure/Temperature: 230 psi @ 100°F (16 bar @ 38°C) (Max temperature dependent on seal and disc selection)
- Wetted Material: ASME SA479 316L (UNS 31603) is standard. EN 10272:2000 GR 1.4435, AL-6XN®, Hastelloy C-22 and others are optional
- Disc Material: 316/EPDM, Teflon, PEEK (all materials are FDA and USP Class VI)
- O-ring Material: Various, all materials are FDA and USP Class VI
- Cracking (opening) Pressure: Polymer Discs: 0.04 psid (2,76 millibar); 316/EPDM: 0.13 psid (8,76 millibar)
- Metallic Surface Finish: Wetted parts: ASME BPE SF5 (20 Ra μin (0,5 Ra μm) electropolished; standard: 8 Ra μin (0,2 Ra μm) electropolished optional
• NEW – SVC for vertical down process outflow and drain lines
• WFI, USP PW: Pump outlet back flow prevention, POU back flow prevention
• Condensate drainage from clean steam distribution loops
• Condensate drainage from process systems using clean steam – fermenters, bioreactors, SIP systems and sterilizers
• Sampling systems in WFI and clean water supply systems
• Air pressure supply systems and pressure rinse systems in pharmaceutical piping
• To replace actuated diaphragm valves on some liquid mixing lines
• Gas (O2, N2, CDA) sparge, purge or blanket applications
• Vacuum breaker (with filter) on vent line for vessels or equipment
